YZG/FZG series vacuum dryer

Introduction: The so-called vacuum drying is to dry the material under vacuum conditions, and if the vacuum pump is used for pumping and dehumidifying, the drying rate is accelerated. Note: If a condenser is used, the solvent in the material can be recovered by the condenser; if the SK series water ring vacuum pump is used, the condenser can be omitted, saving energy investment.

product description:

YZG/FZG series vacuum dryer belongs to static vacuum dryer. The drying equipment will be heated under vacuum condition by vacuuming equipment, and pumping and dehumidifying by vacuum pump, so that the working chamber is in a vacuum state, and the drying rate of materials is greatly accelerated. It also saves energy. If a condenser is used, the solvent in the material can be recovered by a condenser. If the solvent is water, the condenser can be omitted, saving energy investment.

Features:

1. The boiling point of the material solution is reduced under vacuum, so that the heat transfer driving force of the evaporator is increased, so that the heat transfer area of ​​the evaporator can be saved for a certain heat transfer amount.

2. The heat source for the evaporation operation may be low pressure steam or waste heat steam.

3. The heat loss of the evaporator is small, and a higher drying rate can be obtained at a lower temperature, and the heat is fully utilized.

4, can dry low temperature unstable or heat sensitive materials and materials containing solvents and need to recover solvents.

5, can be disinfected before drying, no good works in the drying process, mixed with impurities, in line with GMP requirements.

6. It belongs to static vacuum dryer, so the shape of dry material will not be damaged.

7. The condenser can effectively recover the solvent in the material.

Adaptation:

It is suitable for low-temperature drying of heat-sensitive materials that are easily decomposed, polymerized and deteriorated at high temperatures, and is widely used in the pharmaceutical, chemical, food, electronics and other industries.

Technical Data Sheet:

Specifications YZG-600 YZG-800 YZG-1000 YZG-1400A FZG-10 FZG-15 FZG-20

Drying box size (mm) φ600×976 φ800×1247 φ1000×1527 φ1400×2054 1500×1060×

1220 1500×1400

×1220 1500×1800

×1220

Drying box outer dimensions (mm) 1135×810×

1020 1700×1045×

1335 1693×1190×

1500 2380×1675×

1920 1924×1720

×1513 1513×1924

×2060 1924×2500

× 1513

Number of drying layers 4 4 6 8 5 8 12

Interlayer distance (mm) 81 82 102 102 122 122 122

Baking tray size (mm) 310×600×45 520×410×45 520×410×45 460×640×45 460×640

×45 460×640

×45 460×640

×45

Number of baking pans 4 8 12 32 20 32 48

The pressure inside the drying tube (MPa) ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784 ≤0.784

Drying oven use temperature (°C) 35-150 35-150 35-150 35-150 35-150 35-150 35-150

No-load vacuum in the box (MPa) -0.1 -0.1 -0.1 -0.1 -0.1 -0.1 0.1

At -0.1 MPa, heating temperature 110 ° C

The vaporization rate of water (kg/m2·hr) 7.2 7.2 7.2 7.2 7.2 7.2 7.2

When using a condenser, the vacuum pump model,

Power (kw) 2X-15A 2KW 2X-30A 3KW 2X-30A 3KW 2X-70A 5.5KW 2X-70A 5.5KW 2X-70A 5.5KW 2X-90A 2KW

When no condenser is used,

Vacuum pump model, power (kw) SZ-0.5 1.5KW SZ-1 2.2KW SZ-1 2.2KW SZ-1 2.2KW SZ-2 4KW SZ-2 4KW SZ-2 5.5KW

Drying box weight (kg) 250 600 800 1400 1400 2100 3200